物品名称 规格型号 数量 单位 描述
| 兆欧表 | ZC25-3/500V | 3.00 | 块 | {"测试仪型号":"ZC25-3/500V"} |
| 光电开关 | HJ18-R33DPK | 10.00 | 个 | {"型号":"HJ18-R33DPK","技术参数":"工作电压10-30VDC,电流300mA","使用寿命":"≥180天","参照标准":"GB/T 4208-2017、GB/T 17626.2-2018","备注":"工作距离3m（可调）带反光板，外形为Φ18mm圆柱型，工作类型PNP-NO，外壳材质不锈钢304或黄铜镀镍，连接方式M12连接器。"} |
| 控制变压器 | BK-300VA | 2.00 | 个 | {"型号":"BK-300VA","额定容量":"300VA","输入额定电压1":"AC220V","输入额定电压2":"AC380V","输入额定电压3":"无","额定电流":"1.37/0.79A","输出电压1":"AC6.3V","输出电压2":"AC12V","输出电压3":"AC24V","输出电压4":"AC36V","输出电压5":"无","绝缘等级":"B","材质":"铜漆包线","参照标准":"JB/T 5555-2013","备注":"备注:环境温度:40℃,频率:50~60Hz,防护等级:IP00,不指定品牌型号,参考技术参数购买，使用寿命：≥1年；如不符合技术要求退换货处理。"} |
| 熔断器 | RT16-00/125A | 60.00 | 个 | {"规格型号":"RT16-00/125A","额定电压":"500V","额定电流":"125A","频率":"50-60HZ","参照标准":"GB 13539.1-2015"} |
| 模块 | G71-OD16 | 6.00 | 个 | {"型号":"G71-OD16","品牌":"欧姆龙"} |
| 点火烧嘴 | ZKIH 600/100R | 20.00 | 把 | {"型号":"ZKIH 600/100R","工作电压":"24V","输入输出信号":"24V","适用设备":"OMAV燃气炉","尺寸规格":"934*75*75mm","生产厂家":"国产不指定","材质":"耐热镍铬合金","特殊要求":"燃烧介质天然气","参照标准":"GB/T 36699-2018","备注":"带助燃风的点火烧嘴\n单电极点火和火焰检测装置\n验收标准：现场点火测试正常,10次点火开关测试,无灭火为正常.耐高温1000摄氏度."} |
| 液位变送器 | FL-YW10m | 5.00 | 个 | {"型号":"FL-YW10m","输入信号":"介质变化","输出信号":"4~20mA","工作电压":"24DCV","测量范围":"0~10m","精度等级":"0.1m","尺寸规格":"145mm*28mm","最高工作温度":"85℃","生产厂家":"不限定","参照标准":"GB/T 25477-2010","备注":"要求：\n防腐线长大于12m\n材质：传感器不锈钢304，接线端铸铝，接口防水\n验收标准：\n1）包装完好，内部备件无破碎、损坏。\n2）需保证备件十成新，上电后功能正常。\n3）元件若有升级，出具升级前后元件的外观、尺寸、性能等方面的差异，需提供证明一份。\n4）如不符合验收标准，退换货或全额退款。"} |
| 加热管 | 4.5KW-ZR | 10.00 | 支 | {"型号":"4.5KW-ZR","功率":"4.5kw","温度范围":"0~400℃","工作电压":"380V","加热管的材质":"不锈钢321","法兰材质":"不锈钢321","使用寿命":"90天"} |
| 不锈钢加热管 | 22*1140 | 30.00 | 根 | {"规格型号":"22*1140","额定电压":"0.22kV","额定电流":"10A","材质":"310不锈钢","量程":"无","国产/进口":"国产","适用设备":"4000T挤压机","使用寿命":"400天","参照标准":"GB 4706.36-2014","备注":"不锈钢加热管尺寸φ22*1140，功率2.4KW，材质310不锈钢，内部为镍铬合金不锈钢丝，填充物为优质镁粉，接线方式为两端接线"} |
| 加热管 | 220V1500W | 20.00 | 支 | {"型号":"220V1500W","功率":"1.5kw","温度范围":"0~800℃","工作电压":"220V","额定电流":"6.8A","加热管的材质":"316不锈钢","加热管极限温度":"800","法兰材质":"无法兰","加热管数量":"1","加热管尺寸":"210*57*8","适用介质":"空气中干烧","法兰尺寸":"无法兰","固定孔尺寸":"无法兰固定孔","使用寿命":"365天","参照标准":"JB/T 2379-2016","备注":"接线柱丝径:M4,长度:25mm,接线柱绝缘材质:陶瓷,加热管外壳壁厚:≥0.8mm,此物资用于PODFA取样加热器两根一组串联接入220V电源使用,所供物资与上述要求不符则进行退货处理,由此产生的费用有供货商承担。"} |
| 25T流槽加热盖板 | LR980/250/(120/70)/5 | 20.00 | 块 | {"规格型号":"LR980/250/(120/70)/5KW","额定电压":"0.22kV","额定电流":"22A","材质":"陶瓷纤维","量程":"980","国产/进口":"进口","适用设备":"25T生产线在线处理设备","使用寿命":"≥30天","参照标准":"GB 5959.3-2008","备注":"长度：980mm，宽度：250mm，厚度：120mm/70mm (带弧度)，功率：5KW，用途；流槽加热使用"} |
| 制动电阻 | LCR-3KW/20R | 2.00 | 个 | {"型号":"LCR-3KW/20R","额定功率":"3kw","直流母线电压":"600~1200V","阻值":"20Ω","材质":"外壳材质：铝合金","防护等级":"IP20","适用设备":"牵引机","国产/进口":"国产","生产厂家":"通润","执行标准":"JB/T 6319-2010","备注":"接线方式：端子型，长;550mm±1mm，宽：50mm±0.5mm，高：106mm±0.5mm，外形：梯形，安装方式：底部两端开槽，开槽深度：11mm±0.2mm，宽度：6mm±0.2mm，孔距：30mm±0.5mm，到货验收：使用寿命：≥760天，包装完好，无破碎、损坏、外观材质等必须符合术要求，元件若有升级，出具升级前后元件的外观、性能等方面的证明一份。如不符合验收标准，退换货产生的费用由供应商承担。"} |
| 智能电机保护器 | 额定电压":"380V","额定电流": | 3.00 | 个 | {"额定电压":"380V","额定电流":"0.5A","触点类型":"常开和常闭各一对对","整定范围":"20~100A","功率":"100W","使用寿命":"365天","材质":"外壳材质为阻燃塑料","适用场所":"电机运行保护","参照标准":"GB/T 15290-2012","备注":"具有工作电流显示功能，质保期内正常使用损坏供货商应免费更换"} |
联系人5个
可引荐人脉683人
历史招中标信息159条
